ARF Sea Dweller V2 loose bezel

**indywatchguy** · 03-09-2019, 03:33 AM

Does anyone have a solution to tighten up bezel clicks? Besides dental floss or fishing line!

Sent from my iPhone using Tapatalk

**capice** · 03-09-2019, 04:40 AM

It can have 4 springs with ballbearing attached, change the springs

If it has the above spring, you can bend it a little or get a new one on Ebay
BEZEL INSERT TENSION + CLICK FOR ROLEX SEA DWELLER 16600, 16660 | eBay

**indywatchguy** · 03-09-2019, 04:55 AM

It’s the new redline sea-dweller with the ceramic insert it uses springs. Where would I source the them?

Sent from my iPhone using Tapatalk

**capice** · 03-09-2019, 05:23 AM

Both springtypes can be found on Ebay, see the link in my previous post

**indywatchguy** · 03-09-2019, 05:51 AM

Originally Posted by capice

Both springtypes can be found on Ebay, see the link in my previous post

No link for springs just the flat washer and click spring for classic style sub. I’ll check the bay.

Sent from my iPhone using Tapatalk

**SSTEEL** · 03-09-2019, 06:01 AM

I have had several of these on my bench now, all with springy bezels, there's not much you can do other than shave a tiny amount off the lower circumference of the crystal retainer.

**Tribal** · 03-09-2019, 07:16 AM

Buy new springs!
I bought some with more tension, now the bezel is more tighten and click is much better.
You must cut them to right dimensions.
They where bought here.
Gutekunst Federn - Immer die passende Feder

You need D-011P

Gesendet von meinem Mi MIX 2S mit Tapatalk

**indywatchguy** · 03-09-2019, 10:01 PM

How long did it take to receive them? I’m CONUS.

What did you use to cut the springs?

Sent from my iPhone using Tapatalk

**indywatchguy** · 03-09-2019, 10:03 PM

Originally Posted by SSTEEL

I have had several of these on my bench now, all with springy bezels, there's not much you can do other than shave a tiny amount off the lower circumference of the crystal retainer.

Springy bezels? My bezel sits nice and tight on case, no gap. I just need tighter turn and clicks. It moves with slightest pressure.

Sent from my iPhone using Tapatalk

**SSTEEL** · 03-10-2019, 05:06 AM

Originally Posted by indywatchguy

Springy bezels? My bezel sits nice and tight on case, no gap. I just need tighter turn and clicks. It moves with slightest pressure.

Sent from my iPhone using Tapatalk

Yes, springy as in the bezels are sitting too proud of the mid-case, and rather than butcher/cut/trim the springs, I lower the retainer so it not only brings the bezel flash with the case, it also removes the springy up and down feel of the bezel.

**indywatchguy** · 03-10-2019, 07:01 AM

Originally Posted by SSTEEL

Yes, springy as in the bezels are sitting too proud of the mid-case, and rather than butcher/cut/trim the springs, I lower the retainer so it not only brings the bezel flash with the case, it also removes the springy up and down feel of the bezel.

Ok I get it. This wouldn’t help my bezel. There’s no up down play at all. It fits flush to the midcase.

Sent from my iPhone using Tapatalk

**Tribal** · 03-10-2019, 12:55 PM

Originally Posted by indywatchguy

How long did it take to receive them? I’m CONUS.

What did you use to cut the springs?

Sent from my iPhone using Tapatalk

Really don't know, maybe you get similar in the US.
I took a small side cutter to trim the springs.

Gesendet von meinem Mi MIX 2S mit Tapatalk

**indywatchguy** · 03-11-2019, 03:26 AM

Originally Posted by Tribal

Really don't know, maybe you get similar in the US.
I took a small side cutter to trim the springs.

Gesendet von meinem Mi MIX 2S mit Tapatalk

PM sent please reply.

Sent from my iPhone using Tapatalk

**indywatchguy** · 05-02-2019, 05:07 AM

Anyone heard from @Tribal ?

Sent from my iPhone using Tapatalk

**Tribal** · 05-02-2019, 07:43 AM

Originally Posted by indywatchguy

Anyone heard from @Tribal ?

Sent from my iPhone using Tapatalk

Im in Holliday, will be back next week.

Gesendet von meinem Mi MIX 2S mit Tapatalk

**indywatchguy** · 05-03-2019, 03:20 AM

Originally Posted by Tribal

Im in Holliday, will be back next week.

Gesendet von meinem Mi MIX 2S mit Tapatalk

Enjoy my friend!Thanks for the response!

**indywatchguy** · 06-25-2019, 12:49 AM

Thanks to my friend @Tribal ! I received springs from him and followed his instructions. My ARF SD43 now has very nice sound and clicks very close to gen.

**wimpie007** · 06-27-2019, 09:32 AM

Originally Posted by Tribal

Im in Holliday, will be back next week.

Gesendet von meinem Mi MIX 2S mit Tapatalk

But how do you attach the ball bearings to the new springs?

**Tribal** · 06-27-2019, 12:57 PM

Originally Posted by wimpie007

But how do you attach the ball bearings to the new springs?

ARF has different balls with a small pip on it.

Gesendet von meinem Mi MIX 2S mit Tapatalk

**wimpie007** · 06-27-2019, 01:50 PM

Originally Posted by Tribal

ARF has different balls with a small pip on it.

Gesendet von meinem Mi MIX 2S mit Tapatalk

Pip?

**capice** · 06-27-2019, 02:18 PM

@wimpie007 Use J-B weld and glue them on

**Tribal** · 06-27-2019, 04:21 PM

Originally Posted by wimpie007

Pip?

Like this!

Gesendet von meinem Mi MIX 2S mit Tapatalk

**Tschacko** · 06-28-2019, 02:34 PM

Originally Posted by indywatchguy

Thanks to my friend @Tribal ! I received springs from him and followed his instructions. My ARF SD43 now has very nice sound and clicks very close to gen.

Did you compare the click to the gen ?